AER Basic Performer Acoustic Guitar Combo Amp Black

Description

The Basic Performer Acoustic Guitar Amp with its specially designed construction and its 4 x 60 watt power is an ideal tool for acoustic and electric bass-amplification. More than that, it suits very well for all instruments with strength in the low register, e.g.: cello, harp etc. Apart from its two channels with three-band tone- control and mute-switch it offers a compressor and a notch filter.

Long scale lengths, huge body sizes, and resonance problems are only some trouble zones of the acoustic instrument. The small twin-cone system is perfect - it is fast, provides a superior coverage for the critical mid-range and has got enough substance in the bass range. The AER Basic Performer has four 8"-twin-cone speakers which are individually powered by four 60W power amps provide for the required surface area and the necessary sound pressure level.

The special AER band-pass / bass-reflex cabinet design supports the reproduction of even the lowest frequencies with definition. Hi-end preamps, proper filters and additional professional sound design make the Basic Performer amplifier a multitalented all-round solution.

The sound characteristics of this AER amp are full range, open and light - breathing as well as grumbling and surprisingly appropriate for far more instruments than the bass-related instruments such as harp, cello, accordion ¦ or even try a jazz guitar.

Features

• Channels 1 + 2:
• Input: XLR-combination-socket with a socket for a 6.3 mm jack-plug and an XLR-mle-socket
• Channel Mute: switch to mute the channel
• Line/Mic: switch to adjust input sensitivity
• Line: sources with line level, instruments with active preamplifiers and magnetic sound pick-ups
• Mic: symmetrical microphone input with 24 V phantom power
• Clip: overload indicator
• Gain: input level control
• Bass: tone control for bass
• Middle: tone control for mid-range
• Treble: tone control for treble
• Input: socket for a 6.3 mm jack plug
• Channel Mute: switch to mute the channel
• Pad: damp-switch
• Clip: overload indicator
• Gain: input level control
• Color: mid-range contour filter, switchable
• Contour: control for mixing-in internally generated harmonics
• Bass: tone control for bass
• Middle: tone control for mid-range
• Frequency: mid-range frequency selection
• Treble: tone control for treble
• Front, bottom (from left to right):
• DI Pre/Post: DI-switch pre/post EQ
• 24V Phantom: 24 volt-phantom-power on/off
• 9V Phantom: 9 volt-phantom-power on/off
• Compressor: switches compressor on/off
• Threshold: control for the operational level
• Active: compressor operational
• Ratio: control for the compression-ratio
• ±1dB: indicates the reduction of amplification in dB
• ±3dB: indicates the reduction of amplification in dB
• ±6dB: indicates the reduction of amplification in dB
• ±12dB: indicates the reduction of amplification in dB
• Notch Filter: filter on/off
• Frequency: level-control for the frequency-selection
• Aux Return: level-control for aux return
• Effect Return: level-control for effect return
• Power: power indicator lamp
• Master: Solo - level-control for the overall volume, solo-setting, Ensemble - level-control for the overall volume, ensemble-setting
• Rear:
• Tape In: stereo input for CD and tape
• Phones: headphone output, stereo
• Tuner: output for a tuner
• Insert: insert-point, Tip = Send, Ring = Return, Line Out line-output
• DI Out: XLR-output pre-master
• Send: output for an external effect device
• Return: input for an external effect device or other signal, for example CD-player
• FS-Effect: footswitch effect on/off
• FS-Master: socket for a stereo footswitch, master-selection solo/ensemble
• FS-Mute: socket for a stereo footswitch to mute the channels
• Voltage Select: voltage selection switch
• Power: power supply with line-socket and fuse-holder

Specs

• Inputs: Ch 1:
• Line: unbalanced, 1 MEG
• Mic: balanced, 600 Ohm
• Ch 2:
• Line: unbalanced, 1 MEG
• Mic: balanced, 600 Ohm
• Eff.Return: -10dBV/10k
• Tape-In: -10dBV/10k
• Outputs: Tuner: -10dBV
• Line: 0dBV
• DI: -20dBV
• Send: -10dBV
• Phones: stereo, 300 mV / 32 Oh
• Footswitch Effect External effect = Tip, ground = Sleeve
• Footswitch Mute: Ch 1 = Tip, Ch 2 = Ring
• Footswitch Master: Solo = Tip, Ensemble = Ring
• EQ: Channel 1:
• Bass: ±18 dB/ 100 Hz
• Middle: ±13 dB/ 550 Hz
• Treble: ±11 dB/ 10 kHz
• Channel 2:
• Bass: ±10 dB/ 80 Hz
• Middle: ±10 dB/ 200 Hz - 1kHz
• Treble: ±10 dB/ 10 kHz
• Colour: - 3 dBV/ 700 Hz and + 10 dBV/ 10kHz
• Analog Signal
• Processor: Limiter, Subsonic Filter und
• Enhancer
• Power Amp: Powerconsumption: 220-240 V / 50-60Hz / 300 VA (110V / 50-60Hz)
• Rating: 200 Watt / 4 ohm rms
• Mains Fuse: 3.1 A slow
• Speaker: 4 x 8´ twin-cone speaker system (98 dB 1w/1m, freq. range
• 60 Hz - 18 kHz)
• Cabinet: 0.59´ 3(15 mm) birch plywood
• Dimension: 20.87´ (530 mm) high, 14.17´ (360 mm) wide, 15.75´ (400 mm) deep
• Finish: waterbased acrylic, black spatter finish
• Weight: 50.72 (23 kg)
• 0dB/V 1V
• Specifications and appearance subject to change without notice